
rated 4.8/5 by 5.800+ customers
Dual Mode Explained
rated 4.8/5 by 5.800+ customers
Dual Mode Explained
Is It Really That Good? See for Yourself!
LUMYN PRO
Technical Specifications
Engineered down to the wavelength.
The Device
32-LED Array
Magnetic ChargeDual-Mode Array
32 LEDs
16 Blue (450nm) · 16 Dual-Chip Red & Near-Infrared (660 + 850nm)
Wavelengths
450 · 660 · 850 nm
Blue whitening · Red & near-infrared for healthier-looking gums
Optical Output
Up to 20 mW/cm²
Calibrated for comfort — engineered for sensitive gums
Power & Control
Magnetic Charging
Lightweight & cordless · one-button operation · ~10 sessions per charge
Simple to use
How to use LUMYN PRO
A 10-minute ritual. One button. Two modes.
-
1
Power on & choose your mode
Press and hold the button for 1.5 seconds until you feel a soft buzz and the light turns on. Press once for Mode 1 (Blue) to brighten, or press again for Mode 2 (Red + Near-Infrared) for gum-wellness support.
-
2
Rest it in place
Slide the U-shaped mouthpiece comfortably over your teeth. Keep your teeth gently together or your mouth slightly open — whatever feels natural. Then simply relax.
-
3
10 minutes, then done
Each session runs for 10 minutes and shuts off automatically. For best results, make it part of your daily routine. Afterwards, rinse the mouthpiece with warm water and let it air-dry.
Dont take it from us
Reported their gums looked less red and less puffy.
Saw a visible change in their smile within few weeks.
Deep layers of the skin remain protected.
Were happy with LUMYN PRO and would recommend it.
The Science, In Plain Language
Two Modes. Three Wavelengths.
MODE 1 · WHITENING & ANTIBACTERIAL
A brighter, cleaner smile — by clearing what dulls it.
Teeth look dull and breath turns stale largely because of bacteria and the biofilm they build. Those bacteria produce internal pigments called porphyrins, and when 450nm blue light reaches them, the pigments convert that energy into reactive oxygen species that break the bacterial cell down from the inside.
Selective by design. Beneficial bacteria in your oral microbiome don’t carry these pigments at the same concentration. Published research shows blue light reduces harmful species while leaving healthy gum tissue unharmed at equivalent doses.
Cleaner now, brighter over time. With less of the bacterial buildup that dulls a smile and sours breath, teeth look cleaner and the mouth feels fresher — the cosmetic side of the daily session.
MODE 2 · GUM WELLNESS
Supports the cellular energy your gums rely on — at two depths.
Red light at 660nm is absorbed by the mitochondria, the energy centers inside your gum tissue cells. This supports cellular energy production (ATP), which research links to the body’s natural tissue-maintenance processes and its normal inflammatory response.
Near-infrared goes deeper. 850nm light is invisible and penetrates further than red alone, reaching tissue depths surface light can’t. It’s the wavelength most red light gum devices leave out — and the reason LUMYN PRO is designed to support more than just the gum margin.
More energy, better flow. Cells with greater ATP availability can better support healthy-looking, resilient gum tissue, while improved circulation helps oxygen and nutrients reach the area and clear waste more efficiently.
Lumyn PRO
LUMYN PRO
LUMYN PRO
we got answers
Find answers to common questions about our products before you purchase.
Red and near-infrared light therapy has been studied for years for skin and tissue wellness — it's the same category of light used in clinics, recovery studios, and premium skincare. LUMYN PRO applies that established technology to your mouth: 660nm red and 850nm near-infrared to support gum comfort and a healthier-looking smile, with 450nm blue to help brighten.
The difference is in the configuration. LUMYN PRO carries 32 medical-grade LEDs arranged across a U-shaped mouthpiece that follows the natural curve of your teeth and gums — so the light reaches evenly, top and bottom, the way a flat panel held to your face never could. The blue LEDs sit toward the front where brightening matters most, while the 660nm red and 850nm near-infrared LEDs are positioned to surround the gum line. Both modes deliver an output of up to 20mW/cm² — calibrated to be effective yet gentle enough for a comfortable 10-minute session every day.
You're not betting on something unproven. You're using light your skincare routine may already rely on — engineered for the one place it's rarely been offered before.
Yes. LUMYN PRO™ uses gentle, low-level LED light — non-heat, the same kind used in red light therapy for skin — at levels calibrated for comfortable daily use. Each session is just 10 minutes and shuts off automatically, so you can't overdo it, and the mouthpiece is soft, body-safe silicone. It's non-invasive, with no heat and no chemicals.
It's designed for healthy adults as part of an everyday oral care routine. LUMYN PRO™ is a wellness device, not a medical device — it isn't meant to diagnose, treat, or replace care from your dentist.
As with any light-based device, a little common sense applies:
- Don't look directly into the LEDs or their reflection.
- It's made for adults — keep it away from children, and don't let kids use it!
- Stick to the recommended session time (the device handles this for you).
And please check with your dentist or doctor before you start if you:
- Are pregnant or nursing
- Have or suspect oral cancer, or any unusual or suspicious lesion in your mouth
- Have active sores, ulcers, or open wounds in your mouth
- Have an existing oral health or medical condition
- Are sensitive to light, or take any medication that can increase light sensitivity (such as some antibiotics, pain relievers, allergy medications, or treatments for infection)
If anything ever feels uncomfortable while using it, simply stop and check in with a professional. When in doubt, your dentist or doctor is always the best person to ask.
Most cheaper oral light devices fire every LED at once and call it a feature. LUMYN PRO doesn't. These lights aren't meant to be mixed.
Blue light brightens. Red and near-infrared support gum comfort and a healthier-looking smile. Blend them and both jobs suffer. So we split them into two dedicated modes, each calibrated for its own task.
Mode 1: 450nm blue, 20 mW/cm² optical output.
Mode 2: 660nm red and 850nm near-infrared, combined output up to 20 mW/cm² — including the deeper 850nm wavelength most devices skip.
The hardware matches the ambition. 32 medical-grade LEDs sit across a U-shaped mouthpiece that follows the natural curve of your teeth and gums, so light reaches evenly top and bottom instead of hitting one spot. Body-safe PC and silicone. Magnetic charging. One button, one 10-minute session, automatic shutoff.
This isn't a single-color light in a cheap case. It's two purpose-built modes, each doing its job right.
It's built to match. Its 32 medical-grade LEDs sit across a U-shaped mouthpiece that follows the natural curve of your teeth and gums, so the light reaches evenly top and bottom instead of pointing at one spot — body-safe PC and silicone, magnetic charging, a single-button 10-minute session that shuts off on its own. You're not getting a single-color light in a cheap case. You're getting a device engineered to do each job right.
No refills, no gels, no subscriptions. LUMYN PRO is a one-time purchase. A full magnetic charge lasts around 10 sessions, and the rechargeable battery is built for long-term daily use. Once it's yours, the only thing it costs you is 10 minutes a day.







